Xerox DocuTech 128 HighLight Color Manual de usuario descargar pdf (Pagina 29)

Configuring Printer Drivers 2-19

5 Enter the Device Name or TCP/IP address.

6 Select On to enable Bi-Directional communication.

7 Click OK. Bi-Directional communication is enabled. A Status button appears on the Paper/Output

tab of the printer driver. By clicking Status, you can access current information about the printer. See

About Bi-Directional Printer Drivers on page 2-21.

Configuring Installable Options—Manually

If your network environment does not support Bi-Directional communication, you can configure

installable options manually.

See Bi-Directional Driver Support on page 2-22 to see if your network

environment is supported.

To configure the Installable Options manually:

1 At the desktop, click Start > Settings > Printers.

2 Right-click the appropriate printer icon and select Properties.

3 Select the System Configuration (Configuration) tab.

NOTE: To change the SNMP Community Name, click SNMP Community Name. The printer

name must be changed to match this name for Bi-Directional communication to be available.

Figure 2-3: System Configuration Tab (Properties Dialog)

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 45 46

Sin comentarios

Xerox DocuTech 128 HighLight Color Manual de usuario Pagina 29