Xerox ColorQube 8700 Manual de usuario descargar pdf (Pagina 10)

2. Obtain the correct .dlm file.

The Mopria .dlm will be available on each of the products’ software and support pages at

www.xerox.com.

3. The following two methods are available for submitting the mopriapatch.dlm to the system

once upgrades are enabled:

a. Via the Manual Upgrade Web UI page:

1. Navigate to Properties > General Setup > Machine Software > Manual

Upgrade.

2. Select the Browse button and find the .dlm file.

3. Select the Install Software button.

b. Via a print protocol such as LPR/LPD or Port 9100 (Raw TCPIP Printing), submit the .dlm

file from (2.) above to the device as a print job. If the patch installation succeeds, the

.dlm will update the system, install Mopria, enable it, print a confirmation sheet and

then reboot. Upon reboot, the Network Controller (NC) version will have ".MP" appended

to it to indicate that the Mopria patch has been applied. If the patch fails (due to

incompatibility), it will not install and a failure confirmation sheet will print.

4. Mopria should now be enabled at the device.

a. Print and check the Configuration Report to confirm that the Network Controller version

has appended MP to indicate a successful update.

If the Mopria feature is included natively on the device, then Native support can be confirmed by

checking Xerox

CentreWare

Internet Services or printing the Configuration Page.

• As Admin, login into CentreWare IS.

– Select Connectivity > Setup. This will bring up the Connectivity page in the right frame.

– Under Mobile Workflows, look for Mopria Discovery.

.072.xxx.0910xMP

1 2 ... 5 6 7 8 9 10 11 12

Sin comentarios

Xerox ColorQube 8700 Manual de usuario Pagina 10