search

Xerox PHASER 8400 Manual de usuario Pagina 1

Busca en linea o descarga Manual de usuario para Redes Xerox PHASER 8400. Xerox PHASER 8400 User's Manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 5
  • Tabla de contenidos
  • MARCADORES
    • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
Phaser® 8400 Color Printer
Copyright © 2003 Xerox Corporation. All Rights Reserved.
3-25
Windows 98 and Windows Me
This topic includes:
■ "Preliminary Steps" on page 3-25
■ "Quick CD-ROM Install Steps" on page 3-26
■ "Other Methods of Installation" on page 3-26
■ "Windows 98 and Windows Me Troubleshooting" on page 3-28
Preliminary Steps
1. Verify that the printer is plugged in, turned on, and connected to an active network.
2. Verify that the printer is receiving network traffic by monitoring the LED’s on the back of
the printer or on the CentreDirect External Print Server. When the printer is connected to a
functioning network and receiving traffic, its link LED is green, and its amber traffic LED
is flashing rapidly.
3. Print a “Configuration Page” and verify that the desired protocol is enabled, then follow
one of these options:
■ Proceed to Step 4 if you do not have a TCP/IP address configured for your printer.
■ Proceed to Step 5 if you do have a TCP/IP address configured for your printer.
4. Do one of the following if you do not have a TCP/IP address configured for your system:
■ Contact your system administrator to ensure that configuration is made according to
your company guidelines.
■ Configure your PC with a unique address such as 192.1.1.1.
5. If you have a TCP/IP address, then follow these steps to verify the IP address for your PC:
a. Click Start, then click Run.
b. Enter winipcfg in the Open field. (If the file is not found, TCP/IP may not be
installed.)
c. Click OK.
d. Select your network adapter from the list. The IP address is listed in the IP Address
field.
Note
For more information about installing and configuring TCP/IP in Windows
environments, go to your Microsoft Windows documentation.
6. Proceed to “Quick CD-ROM Install Steps” or “Other Methods of Installation” for the
installation method desired.
Vista de pagina 0
1 2 3 4 5

Indice de contenidos

Pagina 1 - Windows 98 and Windows Me

Phaser® 8400 Color PrinterCopyright © 2003 Xerox Corporation. All Rights Reserved.3-25Windows 98 and Windows MeThis topic includes: "Preliminary

Pagina 2 - Other Methods of Installation

Windows 98 and Windows MePhaser® 8400 Color Printer3-26Quick CD-ROM Install Steps1. Insert the Printer Installer and Utilities CD-ROM into the compute

Pagina 3 - PhaserPort Software

Windows 98 and Windows MePhaser® 8400 Color Printer3-27Configuring a Port The Xerox TCP/IP Printer Port Wizard guides you step-by-step through the fol

Pagina 4 - Verifying Settings

Windows 98 and Windows MePhaser® 8400 Color Printer3-28Changing a PhaserPort IP AddressIf the printer’s IP address is changed, you must change the IP

Pagina 5

Windows 98 and Windows MePhaser® 8400 Color Printer3-293. If you are running CentreWare DP verify the following : Novell Networks: You are required t

Comentarios a estos manuales

Sin comentarios
Relacionado con productos y manuales para Redes Xerox PHASER 8400
Redes Xerox Phaser 7100 Guía de usuario   (90 paginas)
  • Pro-Weld Ativa Ultralife UnionNet Hauri
  • Robinair Bombas De Agua Sony Webcams Sony Accesorios reproductores de mp3 / mp4 MTD Motor Franklin Juguetes De Aprendizaje
  • Infinity ALPHA 1200S Fluke-biomedical ESA612 Kramer VS-66HDCP Philips QC 5099
  • Electrolux EDH3284PDW Manual de usuario Db E8 Manual de usuario Aja V2Analog Manual de usuario Yamaha RX-V2065 El manual del propietario Ampeg BA-108 Manual de usuario