Xerox DocuTech 128 HighLight Color Guía de instalación Pagina 63

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 82
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 62
DocuTech 128/155/180 HighLight Color Installation Planning Guide 4-35
Prepare for installation
Ordering supplies for the installation
You need to order consumable supplies (those that are depleted
during operation of the printer), such as paper, dry ink, developer,
and fuser blend. It is important that you have an adequate supply
on hand for installation and that you maintain the supply after
installation.
This section describes the supplies needed for installation. Your
sales representative will help you place your initial order for
supplies. The "Maintenance" chapter provides you with the
information you need to order additional supplies as you require
them, a consumable supplies table, and a supplies checklist.
Paper
You need to select your paper carefully. If you do not use the
proper paper, you increase the probability of paper jams and
misfeeds.
Acceptable paper stocks and sizes
Paper trays 1 and 2 accept 8.5 x 10 inch (215 x 254 mm), 9 x 11
inch (228 x 279 mm), 9 x 14.33 inch (228 x 364 mm), and A4 (210
x 297 mm) cut sheet paper. Paper trays 3, 4, and 5 accept paper
up to 17 x 14.33 inches (432 x 364 mm).
NOTE: 17 x 14.33 inch (432 x 364 mm) paper can be sent to the
top tray and Bypass Transport.
You can use standard white, colored, pre-drilled, and preprinted
(letterhead and forms) paper, labels, and transparencies. The
stock you use must meet the specifications set forth by Xerox for
operability in the printer.
For additional information about paper specifications, refer to the
Xerox Document Services Platform Series DocuTech 128/155/180
Operator Guide.
Recommended weight and grade
Use a good quality, xerographic-grade paper. For best results, use
paper that is 20-pound or 80-grams per square meter (gsm) bond,
xerographic grade. Xerox 4024 Dual Purpose Paper provides
optimal performance in the printer. Refer to the consumable
supplies table in the "Maintenance" chapter.
Use paper within these parameters:
Lightest: 16-pound or 60-gsm
Heaviest: 110-pound or 200-gsm
Vista de pagina 62
1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 81 82

Comentarios a estos manuales

Sin comentarios