
viii DocuTech 128/155/180 HighLight Color Installation Planning Guide
Safety notes
Print Server
USA/Canada The print server requires a dedicated 115 VAC 20 Amp grounded
receptacle.
Europe The print server requires a 220-240V, 13 or 10 Amp grounded
receptacle.
Print server cautions
Follow all safety cautions, warnings, and instructions marked on
the print server.
• Ensure that the voltages and frequency rating of the power
receptacle match the electrical rating label on the equipment.
• Do not make electrical or mechanical modifications to the
equipment.
• Use the power cable that is supplied with your print server. Do
not use an extension cord, or remove or modify the power cord
plug. If the plug must be changed, a qualified electrician must
install the plug correctly on the power cord.
• Plug the power cable directly into a correctly grounded
electrical outlet or into the power strip that is connected to this
outlet. If you are not sure whether or not the outlet is correctly
grounded, consult a qualified electrician.
•Do not use an adapter to connect the print server to an
electrical outlet that lacks a ground connection terminal.
• The power switch functions as a standby type of device only.
The power cord serves as the primary disconnect device for
the system.
•Do not push objects into slots or openings on the equipment.
Electrical shock or fire may result.
•Do not obstruct ventilation openings. These openings prevent
overheating of the print server.
Printer or print server - emergency power off
If any of the following conditions occur, turn off the equipment
immediately and disconnect the power cable from the electrical
outlet. Contact an authorized Xerox Service Representative to
correct the problem:
• The power cable is damaged or frayed.
• A wall panel circuit breaker, fuse, or other safety device has
been tripped.
• Liquid is spilled into the equipment.
• The equipment is exposed to water damage or flood.
Comentarios a estos manuales