
4-4 DocuTech 128/155/180 HighLight Color Installation Planning Guide
Prepare for installation
* The printer depth without the front and rear covers is 34.8 in
(88.3 cm)
• The space requirements for the print server stand are 30 x 30
in (76.2 x 76.2 cm).
• The minimum total space required for this configuration is
264.6 x 142.0 inches (672 cm x 361 cm), including service
area. Refer to Figure 4-2.
• The total weight of the system is 3129 lbs (1419.3 kgs).
NOTE: Not included in this weight is the print server stand or
FreeFlow Print Server.
(2) Printer/HLC with
inverter feeder/
stacker and two
feeder/stackers
The dimensions of the individual components for this configuration
are shown in the chart above. The total dimensions of the printer
with the inverter feeder/stacker and two feeder/stackers (installed
with all front and rear covers) are as follows:
• Width: 207 inches (525.7 cm)
• Depth: 42 inches (106.6 cm)
• The minimum total space required for this configuration is
296.6 x 142.0 inches (753 x 361 cm), including service area.
Refer to Figure 4-2.
• The total weight of the system is 3650 lbs (1655 kgs).
NOTE: Not included in this weight is the print server stand or
FreeFlow Print Server.
(3) Printer/HLC
with inverter
feeder/stacker
and three feeder/
stackers
The dimensions of the individual components for this configuration
are shown in the chart above. The total dimensions of the printer
with the inverter feeder/stacker and three feeder/stackers
(installed with all front and rear covers) are as follows:
• Width: 239 inches (607 cm)
• Depth: 42 inches (106.6 cm)
• The minimum total space required for this configuration is
328.6 x 142.0 inches (835 x 361 cm), including service area.
Refer to Figure 4-2.
• The total weight of the system is 4171 lbs (1892 kgs).
NOTE: Not included in this weight is the print server stand or
FreeFlow Print Server.
Comentarios a estos manuales