Xerox DocuTech 128 HighLight Color Guía de instalación descargar pdf (Pagina 57)

DocuTech 128/155/180 HighLight Color Installation Planning Guide 4-29

Prepare for installation

60 Hz printer outlet voltages

The following table shows the voltages for the outlets on your

printer. All power outlets must have a dedicated circuit for each

system equipment piece. Make sure each power cord has a

separate circuit.

Table 4-10. Printer (60 Hz) voltage requirements at power

outlet.

50 Hz printer outlet voltages

All power outlets must have a dedicated circuit for each system

equipment piece. Make sure power cord has a separate circuit.

NOTE: Consult with your service representative to ensure that the

installation conforms to your local electrical requirements.

WYE (or Star)

configurations– 50 Hz

For the 50 Hz WYE configuration, measure the WYE or Star

connection voltages at the power source. Three-phase branch

circuit (3 lines and neutral, plus ground. Total 5-wire system,

including ground).

The following tables list the 50 Hz WYE/Star printer outlet

information for 380,400, and 415 volts.

Table 4-11. Printer (50 Hz) WYE (Star) 415 voltage

Service outlet

configuration

(3 wires plus ground)

Measurement

of wiring

Nominal Range

4 Wire Line 1 to

neutral

120 V RMS 107-127 V RMS

4 Wire Line 2 to

neutral

120 V RMS 107-127 V RMS

4 Wire Neutral to

ground

00-10 V RMS

4 Wire Line 1 to line 2 208 V RMS 182-220 V RMS

4 Wire Line 1 to line 2 240 V RMS 210-254 V RMS

Service

outlet

configuration

Measurement

of wiring

Nominal Range

5 Wire 415 V Line 1 to line 2 415 V RMS 374-457 V RMS

5 Wire 415 V Line 2 to line 3 415 V RMS 374-457 V RMS

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 85 86

Comentarios a estos manuales

Sin comentarios

Xerox DocuTech 128 HighLight Color Guía de instalación Pagina 57

Comentarios a estos manuales

Relacionado con productos y manuales para Las Impresoras Láser / Led Xerox DocuTech 128 HighLight Color