Xerox DocuTech 128 HighLight Color Guía de instalación descargar pdf (Pagina 62)

4-34 DocuTech 128/155/180 HighLight Color Installation Planning Guide

Prepare for installation

Print Server

USA/Canada The print server requires a dedicated 115 VAC 20 Amp grounded

receptacle.

Europe The print server requires a 220-240V, 13 or 10 Amp grounded

receptacle.

Network requirements

This section describes the network requirements for installing one

or more DocuTech printers. Work with your Network Administrator

to assess what type of network you have and what modifications

need to be made to supply an Ethernet connection for the

FreeFlow Print Server.

Network hardware

The Ethernet interface on the FreeFlow Print Server is a 10/100/

1000 MB per second twisted pair standard (10BaseT, 100Base T,

or 1000BaseT). Attachment Unit Interface (AUI) Coax Ethernet is

enabled with an optional adapter cable.

The Ethernet connection to the FreeFlow Print Server must be

compatible with the Institute of Electrical and Electronics

Engineers (IEEE) 802.3 standard.

Network protocols

The FreeFlow Print Server supports TCP/IP, IPX/SPX, Socket

TCP/IP, and EtherTalk Link Access Protocol (ELAP) protocols if

the proper gateways are installed on the print server.

NOTE: The FreeFlow Print Server does not provide Novell server

network services. If you plan to use the IPX/SPX protocol, you

must have a Novell server installed on your network.

Telephone requirements

One telephone line is recommended where the DocuTech printer

is installed.

Customer support

There will be times when the operator or administrator will need to

read the screen information from the FreeFlow Print Server

dialogs to the customer support personnel. Therefore, it is

necessary to provide a telephone in close proximity to the

DocuTech system so that the operator or administrator can easily

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 85 86

Sin comentarios

Xerox DocuTech 128 HighLight Color Guía de instalación Pagina 62